Tomei Power Nissan S14/S15 SR20DET PonCam Camshafts 256 duration 11.5mm lift

Product viewed: 1723
Ex Tax: $340.00

Tomei Power Nissan S14/S15 SR20DET PonCam Camshafts - 256 duration, 11.5mm lift

Bring your Nissan S14 or S15's SR20DET to life with these Tomei Powered PonCam Camshafts (143044). These cams feature a 256 duration lobe with hefty 11.5mm of lift. These are a direct drop in replacement cam for your stock OEM camshafts and can be used with OEM valve springs and retainers, you can even run these cams with no ECU modification (although we HIGHLY recommend tuning to take full advantage of the benefits these cams can offer your engine). These are some of the best drop in replacement cams on the market for increasing HP and TQ without the headache of swapping out springs and retainers. 

For those looking to do a full cylinder head build be sure to contact us and speak to one of our tuners or engine builders about the best possible camshafts, vavletrain and head work aka port & polish for your engine build. Our engine builders are here to ensure you get the best combination of parts that will work together and get the most reliable power out of your engine build. We will need to know; What type of driving you do, What turbo/manifold will be used, what fuel and of course what budget? 

FREE TIP: Check out the blog for a detailed write up on the ultimate "dual guided shim" set up for your SR20. This is the best way to keep rocker arms and shims happy and in place at 9000+ RPM. This is hands down one of the best things you can do to your cylinder head unless you are planning to go the SR20VE head route.  


The cams were maximized so that adjustable cam sprockets may not be required. The Poncams are only available in a 256 IN / 256 EX combo. If you are needing a longer duration or higher lift camshaft check out the Tomei ProCam options which can be purchased separately for intake and exhaust allowing you to create the combo that will work for you and the powerband you’re after. If you have any questions be sure to contact us and speak with a tuner or engine builder! 

Contact us any time with special requests or questions, we are here to support your build and are always happy to share information and help save you $$$. Call or email 888-290-3213 or you call be sure to leave a voice mail as we are often in the shop away from the phone)

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:

Related Products