Sikky Manufacturing Stage 2 LS V8 Swap Kit for Nissan 240SX S14

Product viewed: 1236
Ex Tax: $2,612.50

Sikky Manufacturing Stage 2 LS V8 Swap Kit for Nissan 240SX S14

It is without a doubt that the Chevy LS has become one of the preferred choices for engine swaps and the engine has been swapped into just about everything with wheels. Turn your Nissan 240SX into a monster with the Sikky Manufacturing Stage 1 LS V8 swap kit. The Sikky LSX swap kits are designed for use with all LS Chevy engines (LS1-LS9) and the T-56 transmission (other transmission mounts available upon request). The Sikky kit requires no modifications to the factory cross member or subframe and does not hang below the crossmember when installed maintaining the functionality of an OEM engine and ground clearance. This kit makes the LS engine a direct drop in solution. The Sikky motor mounts are CNC machined billet aluminum. The urethane transmission and motor mount bushings are designed specifically for these applications. The oil pan is built with a 1/2″ thick flange and back plate to provide superior strength. All SIkky swap kits are tested under rigorous track conditions to ensure they are ready for serious abuse by you!


Sikky Manufacturing Nissan 240SX S13 LS V8 Swap Kit

The Stage 2 Mount Kit Includes:

Aluminum Race Oil Pan

• 7 Quart High Capacity Design
• 6061 CNC Machined Flanges from 1/2″ Aluminum Retaining OEM like Structural Rigidity (not flimsy like other aftermarket pans)
• Rear Flange at Bell Housing Allows Install of Factory Dust Shields
• Baffle and Trap Doors to Prevent Oil Starvation
• New OEM Oil Pan Gasket
• Custom Oil Pickup Assembly

Sikky Manufacturing Nissan 240SX S13 LS V8 Swap Kit oil pan

Remote mount filter Kit

• -10 AN Fittings (4) and Stainless Braided Lines (2)
• Remote Oil Filter Base
• High Quality Oil Filter
• All Fittings and Hardware

Sikky Manufacturing Nissan 240SX S13 LS V8 Swap Kit oil filter kit

Engine Mounts & Transmission Mounts

• CAD/CAM Designed CNC Machined Solid 6061 T-6 Aluminum Mounts
• Custom Urethane Bushings with True Isolation
• High Grade Hardware Kit
• Proper Engine Placement and Axle Alignment
• Lifetime Warranty on Engine Mounts

Sikky Manufacturing Nissan 240SX S13 LS V8 Swap Kit motor mount close up

Trans Mount

• CAD/CAM Designed
• CNC Bent Steel Mount Bracket
• Urethane Bushing
• High Grade Hardware Kit
• Designed for use with the T56 or T56 Magnum
• Lifetime Warranty on Transmission Mount


• Steel One Piece Driveshaft with High Strength 1310 U-joints
• Designed for Use with the T56 or 4l60e Transmission


• Headers - 1-¾” primaries / 1-¾” primaries cearmic coated (+$300.00) / 1-⅞” primaries / 1-⅞” primaries ceramic coated (+$300.00)

Sikky Manufacturing Nissan 240SX S13 LS V8 Swap Kit headers

Power Steering Line Kit

• Fits LS1 and LS2 power steering reservoirs 

Sikky Manufacturing Nissan 240SX S13 LS V8 Swap Kit Power Steering Lines

LS V8 Swap Kit Options

• ABS or NON-ABS car needs to be determined for correct driveshaft
• Solid Motor Mounts (+$70.00)
• Steel driveshaft included, Aluminum driveshaft optional (+$200.00)
• Master Cylinder Kit (+$249.99)
• Fuel Line Kit - Short Line Kit (+$274.99), Long Line Kit (+$374.99)
• Intake System - LS1 Intake System (+$299.99) / LS3 Intake System (+$299.99) / LS Speed Density Intake System (+$299.99)

Contact us any time with special requests or questions, we are here to support your build and are always happy to share information and help save you $$$. Call or email 888-290-3213 or you call be sure to leave a voice mail as we are often in the shop away from the phone)

Sikky Manufacturing is a USA based manufacturing company that focuses on keen attention to detail and starts with only the best materials and processed to make their unique parts. Specializing in V8 swaps Sikky has everything you need to make a V8 swap a straight forward and simple job. 

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:

Related Products