Radium Engineering Fuel Rail Kit Nissan Skyline GT-R RB26DETT

Radium Engineering Fuel Rail Kit Nissan Skyline GT-R RB26DETT

Proper fuel delivery is arguably one of the most critical components for those looking to get all the power they can safely and reliably from an engines setup. More often then not, OEM fuel rails are incredibly restrictive and impede the fuel delivery to the injectors under high fuel pressures, where arguably having consistent fuel pressure is absolutely necessary. With the Radium Engineering Fuel Rail kit for the Nissan RB26DETT (20-0217) you can make sure that your fuel rail is able to flow all the fuel you can push through it!

This fuel rail kit is a direct bolt-on for all RB26DETT engines and features a large 0.69" ID bore to suit even the most fuel hungry engines.

For thermal insulation, press-fit machined phenolic spacers and washers are included to completely isolate the fuel rail from heat transfer via the manifold and mounting bolts, as shown.

20-0217 Radium Engineering RB26DETT Nissan Skyline GT-R Fuel Rail

The upper injector bores are machined with a common 11mm ID (Denso). NOTE: Six custom upper injector O-rings are included allowing the use of OEM RB26DETT (JECS) injectors which normally require 10.45mm ID bores.

This kit is compatible with all fuel types including popular alcohol mixtures such as E85.

What's Included:

All parts listed below are included for a trouble and leak-free installation.
-Black Anodized Aluminum Fuel Rail
-Insulating Phenolic Spacers (x2)
-Insulating Phenolic Washers (x2)
-Stainless Steel Mounting Bolts (x2)
-Viton O-rings for OEM Injectors (x6) 

NOTE: This fuel rail kit does NOT come standard with fittings. Fittings are purchased separately, please contact us for fitting options! 

20-0217 Radium Engineering RB26DETT Nissan Skyline GT-R Fuel Rail

Port Configuration

The Front, Rear, and Center Ports use 8AN ORB (3/4"-16 O-ring threads) to accept many adapter fittings for custom high flow fuel system builds. If the OEM Fuel Pressure Regulator will be reused, add the Radium Engineering OEM FPR Adapter (20-0222) to be used in the front port. The Gauge Port has 1/8" NPT female threads commonly used for a fuel pressure gauge/sensor or it can be plugged. 

20-0217 Radium Engineering RB26DETT Nissan Skyline GT-R Fuel Rail

Fuel Pressure Regulator Options:

The fuel rail can be plumbed to a remote aftermarket pressure regulator using -AN hose and fittings. Or the options below can be used to mount the pressure regulator directly to the fuel rail. 

The front port on this fuel rail is compatible with the Radium Engineering Direct Mount Regulator with black top (20-0223-00), as shown below, or Radium Engineering Direct Mount Regulator with green top (20-0223-00).  Note: Verify hood clearance is available before installing. 

20-0158 Radium Engineering S13 Nissan SR20DET Fuel Rail Fuel Pressure Regulator

Optional Accessories:

- Fuel Pulse Damper

Do I need a pulse damper (FPD)?

The opening and closing of the injectors creates pressure pulses in the fuel rail, which can lead to unstable fuel pressure. In order to achieve a safe and consistent rail pressure, a pulse damper should be used (especially with high flow injectors). The internal diaphragm will absorb oscillation pulses and stabilize fuel pressure. The center -8AN ORB port on the fuel rail is an ideal location for a damper. It is compatible with Radium Engineering FPD-R (20-0176) or the Radium Engineering FPD-XR (20-0177), as seen in the picture below (on a KA24DE fuel rail the FPD is on the bottom in the center of the fuel rail) Not sure what damper to use, contact us and we will make sure you get the right one for your application!

20-0157 Radium Engineering S13 or S14 Nissan 240SX KA24DE Fuel Rail Fuel Pulse Damper

- Fuel Pressure Gauge

You can easily setup a Radium Engineering Mechanical Fuel Pressure Gauge (20-0029) using the 1/8 NPT port on the fuel rail as seen below (on a KA24DE fuel rail). 

20-0157 Radium Engineering S13 or S14 Nissan 240SX KA24DE Fuel Rail


Contact us any time with special requests or questions, we are here to support your build and are always happy to share information and help save you $$$. Call or email 888-290-3213 or sales@brewedmotorsports.com (if you call be sure to leave a voice mail as we are often in the shop away from the phone)

Since 2010, Radium Engineering's goal has been to simply design and produce the highest quality, best-performing aftermarket automotive performance products. Located in the Pacific Northwest, Radium is a team with personal passions for innovation which leads Radium towards advancement in the industry.

All Radium products are carefully planned with thorough research and development and designed in-house using the latest computer simulation and modeling techniques. Extensive testing and evaluation ensures the durability and integrity of Radium products exceed consumer expectations. Each product is then subjected to rigourous dyno and track testing to ensure proper performance in the most extreme conditions. For these reasons, top street and race cars worldwide rely on Radium products. 

Make Model Years
Nissan Skyline GT-R 1989 - 2002

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:

Related Products