Injector Dynamics ID1000cc Fuel Injector

Product viewed: 18939
Ex Tax: $120.00

Injector Dynamics - High Impedance Injectors - Saturated ID 1000cc

The Injector Dynamics 725cc injectors have been discontinued in favor of the new ID1050x injectors!

We're currently offering FREE AEM FUEL pumps with ALL Injector Dynamics orders Call Now to reserve yours 888-290-3213 or email

Here at Brewed Motors precision matched fuel injectors are a key ingredient in all of our projects and builds. Everything from street cars making 400whp and getting 29 mpg + to full blown drag cars running staged fuel injection systems for extreme fuel supply. ID injectors are Brewed Motors 1st recomendation for any new fuel system. 

Key Features

  • Nominal Flow Rate - 1015cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
  • Maximum Differential Fuel Pressure - 7.0 Bar (101.5 psi)
  • Fuel Compatibility - Compatible With All Known Fuels
  • Electrical Connector - USCAR
  • They are a 48mm long body, shorter than normal injectors. The adaptor tops make them "standard" 60mm length and adapt them to 11mm or 14mm orings. With the ability to fit any top feed fuel rail design engine as well as, the proper battery comp values are also provided with each set so you can set it up in your computer and have consistent a/f ratios as battery voltage fluctuates. Most other injectors don't offer that information at anything other than 1 voltage level.
  • Price is per injector and includes the adaptor for the top and an injector clip with pins
  • High Impedance, no need for injector drivers or injector resistors
  • The high pressure and excellent atomization makes these are great option for high power N/A applications as well.
  • High duty cycle, with a recovery time of only 1ms, all injectors will run up to 92.5% duty cycle at 9k rpm and 95% duty cycle at 6k rpm while maintaining linearity within 1%
  • Excellent low pulse width response, linearity within 2% all the way down to 2ms, predictable response down to 1.5ms. Using a 3 dimensional battery comp table with Motec V3 software, low pulse width response can be linearized to practically zero flow.
  • Excellent consistency, no sets will require more than a 1% trim
  • Ruler flat response, unmatched linearity means easy tuning and accurate compensations.

Brewed GTR, Vr4 and S13 all running ID 1000cc injectors (video)

Injector Dynamics Fuel Injectors

Injector Dynamics prides themselves on their ability to apply modern technology to fuel injector design and testing. Their commitment to fuel injection technology has led them to design and build their own flow testing equipment rather than relying on old testing technology. This ensures that every set of ID injectors are perfectly matched and calibrated whether it be the ID1050X or the huge ID2000cc injectors

Bosch Motosport has acknowledged Injector Dynamics technical capabilities and commitment to quality and have now partnered with Injector Dynamics. The new X series injector line is the love child of this new alliance.

If you are looking for a high quality, high-flow fuel injector for almost any application and any fuel then look no further than Injector Dynamics.

Brewed Motorsports is proud to offer the full line of Injector Dynamics Fuel Injectors: The 1050X, ID1000, ID1300, ID1700 or the ID2000. We offer free worldwide shipping on all Injector Dynamics fuel injectors with the lowest prices around. Contact us to ask about vehicle applications or tuning related questions any time.

Injector Dynamics 1050X, 1300x, 1700x and 2000cc

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:

Related Products