AEM EMS Etune V2 & Infinity tuning

Sale AEM EMS Etune V2 & Infinity tuning
Product viewed: 5352
$500.00 $700.00
Save: 29%
Ex Tax: $500.00
  • AEM-tuner V2 ems ignition timing SYNC AEM-tuner V2 ems ignition timing SYNC Mar 24, 2015 Why do you need to Sync your timing? Syncing the ignition timing when using and AEM is a key step in the start up process. Using a timing light to check phys..
  • Rally Style Anti Lag system & tuning Rally Style Anti Lag system & tuning Jun 17, 2015 Rally style Anti lag systems, set up and tuning After such positive feedback to our last post (click here for the Intro to Anti Lag) explaining the basi..
  • Etune ECU & EMS Etuning explained Etune ECU & EMS Etuning explained Aug 19, 2015 What is Etuning and does it work? Etune or Etuning: to create a custom ECU/EMS calibration/map for an engine/car through the internet (from a remote location..
  • Korean R34 GTR vs S15 GTX35 30psi Korean R34 GTR vs S15 GTX35 30psi Aug 30, 2015 Nismo RB26 GT-R and GTX35 S15 Tuning Trip in Seoul South Korea is a very interesting place with a booming “pop culture” and a young population that love..
  • Tuning Secrets No Lift Shift & Antilag launch control Tuning Secrets No Lift Shift & Antilag launch control Jan 08, 2016 Drag style Anti Lag & No Lift Shift aka NLS Brewed Motors specializes in ECU Tuning including Anti Lag and NLS contact 888-290-3213 or sales@brewedm..
  • AEM Infinity tuning & Ignition sync AEM Infinity tuning & Ignition sync Feb 01, 2016 Why do you need to Sync your timing? Syncing the ignition timing when using an AEM Infinity ems is a key step in the start up process. Using a timing li..
  • BMW M3 AEM Infinity ems and Etune BMW M3 AEM Infinity ems and Etune Apr 27, 2016 What is Etuning and does it work? Etune or Etuning: to create a custom ECU/EMS calibration/map for an engine/car through the internet (from a remote location..
  • AEM Electronics CD7 Digital Dashes Available Now AEM Electronics CD7 Digital Dashes Available Now Nov 21, 2016 AEM Electronics CD7 / CD7-L Full Color 7" Digital Dashes Now Available AEM Digital Dashes ON SALE NOW! SEMA 2016 saw a lot of great new products being re..

AEM ems Etune service for Infinity, V2 & EMS-4

A Brewed E-tune unlocks hidden HP while improving reliability and fuel economy. Don't leave anything on the table when it comes to tuning your AEM, a Brewed Etune will ensure your engine is running at peak efficiency for years to come. Engine mods, fuel grade and elevation all play major rolls in how an engine runs, there is no better way to ensure your engine is getting exaclty what needs than a Brewed Etune. Brewed supports all V1, V2, EMS-4 and Infinity AEM engine management systems.

Etuning works as follows:

  1. Brewed Motors makes a custom base calibration "Map" for your AEM ems based on your exact engine mods and emails it to you.
  2. You upload the calibration to your AEM ems/car.
  3. You take the requested Data logs Brewed Motors can walk you through this step and will also tell you exactly what parameters to log and how to drive IE: RPM and Throttle position **you will need to use a nice straight, flat road/serface you can safely do 3rd gear pulls on.**
  4. Email Brewed Motors your Data Logs
  5. Brewed revises the calibration based on your data log and emails the new calibration. You can normally expect your updated calibration within 24 business hours however it may take 48 hours during race season. 
  6. "Re-Tune" after new parts are installed or new fuel type is used we normally charge $100  for a re-tune unless there has been very drastic change in the engine/setup. Even if big changes are made we will always be able to give a special re-tune price to returning customers, just send us an email or give us a call! 

Pre Tuning Preparation:

  1. Boost leak test the car. (This ensures there are no leaks, even a small leak will have a big effect on the tune and cause problems down the road.) Click here to check out a great DIY boost leak tester article and build instructions from a subaru guy.  
  2. Test for coolant, oil and fuel leaks (because fires are BAD).
  3. Spark plugs; check you are using the correct heat range plug and that the plug is gapped correctly
  4. Check your wide band AFR O2 sensor is working correctly and connected to the EMS and or data logger
  5. Ignition sync; on most engine you should use a timing light to check that ignition timing at the engine matches the ignition timing value at the EMS 

AEM etune Infinity, V2 and EMS-4

Commonly used/requested data logs:

***Note*** Each data log should be kept as short as possible (10-20 seconds is normal) Logs should be done in 3rd gear unless otherwise stated. DO NOT do any High throttle pulls or data logs until we have finished tuning the low/mid range throttle ranges.

  1. Engine start (cold start/engine warm up) this log will be one of the longest logs (logging from cold start to operating temperature).
  2. Engine start/idle (warm/operating temp) this log is normally ~15 seconds
  3. Low throttle (~10% throttle from idle to 4000 rpm) **holding throttle steady is the most important factor here, do not change the throttle position during the log.**
  4. Low throttle (~20% throttle from idle to 4000 rpm)**holding throttle steady is the most important factor here, do not change the throttle position during the log.**
  5. Mid throttle (~40% throttle from idle to 5000 rpm)**holding throttle steady is the most important factor here, do not change the throttle position during the log.**
  6. High throttle (~60% throttle from idle to redline)**holding throttle steady is the most important factor here, do not change the throttle position during the log.**
  7. High throttle (100% throttle from idle to redline)**holding throttle steady is the most important factor here, do not change the throttle position during the log.**

Brewed Motors

A true automotive enthusiast owned business with convenient international locations, we are ready to help no matter where you live or what language you speak. After countless years of experience working in all areas of the automotive industry our team of engineers, tuners, mechanics and fabricators united in the never ending search for artistic mechanical perfection. We would like to invite everyone who shares this passion to join our team, we are here to offer you our support and expertise. We always enjoy working with new people to help create your own unique automotive masterpiece.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Related Products
×
×
×
×
×
×
×