ID1300 Injectors Honda s2000 1300.48.14.14.4

• S2000 Infinity ems Setup & Tuning with Flex Fuel Jan 10, 2017 AEM Infinity 506 and 508h Plug n Play S2000 F20 and F22 When Honda built the S2000 they did more than a few things right and provided a great platform t..
• AEM ecu Tuning VTEC, VVL, Low Cam to High Cam transition Jun 05, 2017 Variable Cam Profile Fuel Map Tuning Here is a good example of a fuel map with a huge spike and VERY tight RPM scaling. This is how a secondary cam lobe (low..
• Motec Electronics Setup Tuning and Support May 03, 2017 An Introduction to Motec Electronics, Setup and Tuning Benefits For about 30 years, fuel injection has been on an unstoppable journey towards the replacement..

1300cc Injector Dynamics S2000 F20 kit: 1300.48.14.14.4

We're currently offering FREE AEM FUEL pumps with ALL Injector Dynamics orders Call Now to reserve yours 888-290-3213 or email Sales@brewedmotorsports.com

Here at Brewed Motors precision matched fuel injectors are a key ingredient in all of our AP2 S2000 builds. Everything from street cars making 400whp and getting 30+ mpg to full blown drag cars running staged fuel injection systems the ID injectors are Brewed Motors 1st recomendation for any Honda F22 build. With special internals designed for Alcohol (Ethanol/Methanol) based fuels the ID1300's are the a true "Flex Fuel" friendly injector that will perform perfectly for years to come. If you love S2000's check out the last Full-Race EFR turbo kit S2000 we tuned on AEM Infinity.

The 1300.48.14.14.4 injector kit includes 4 ID 1300cc injectors that are a perfect OEM fit for the factory fuel rail or aftermarket rail using a 14mm top Oring seal. Kits ship with everything you need to install: flow matched injectors, data sheet and plug n pin connectors. If you want Plug and Play connectors just give us a call or send an email to get the absolute best pricing. For builds looking to make over 500hp we highly recommend using an aftermaket fuel rail. The stock s2000 fuel rail has a small inlet/outlet that will restrict the fuel flow for high power builds. Package deals on fuel rails and Injectors available at huge savings, contact us for details and options.

Key Features for the Honda S2000 kit part # 1300.48.14.14.4

• Nominal Flow Rate – 1340cc/min @ 3.0 Bar (43.5 psi) Using Iso Octane at 52 Degrees C (125 Degrees F)
• Maximum Differential Fuel Pressure – 6.0 Bar (87.0 psi)
• Fuel Compatibility – Compatible With All Known Fuels – (Designed Specifically for Alternative Fuels)
• Electrical Connector – USCAR
• The ID1300 was designed in partnership with Bosch Motorsports
• Price is per injector and includes the adaptor for the top and an injector clip with pins
• High Impedance, no need for injector drivers or injector resistors
• The high pressure and excellent atomization makes these are great option for high power N/A applications as well.
• High duty cycle, with a recovery time of only 1ms, all injectors will run up to 92.5% duty cycle at 9k rpm and 95% duty cycle at 6k rpm while maintaining linearity within 1%
• Excellent low pulse width response, linearity within 2% all the way down to 2ms, predictable response down to 1.5ms. Using a 3 dimensional battery comp table with Motec V3 software, low pulse width response can be linearized to practically zero flow.
• Excellent consistency, no sets will require more than a 1% trim
• Ruler flat response, unmatched linearity means easy tuning and accurate compensations.

Brewed tuned R32 and S2000 both running Injector Dynamics injectors

Injector Dynamics prides themselves on their ability to apply modern technology to fuel injector design and testing. Their commitment to fuel injection technology has led them to design and build their own flow testing equipment rather than relying on old testing technology.

Bosch Motosports acknowledged their technical capabilities and commitment to quality by partnering with Injector Dynamics. The ID1300 high flow fuel injector is a product of that alliance.

If you are looking for a high quality, high-flow fuel injector for almost any application and any fuel then look no further than Injector Dynamics.

Brewed Motorsports is proud to offer the full line of Injector Dynamics Fuel Injectors: The ID725, ID850, ID1000, ID1300 and the ID2000. We offer free worldwide shipping on Injector Dynamics fuel injectors. Contact us to ask about vehicle applications or tuning.

 

Make	Model	Years
Honda	S2000	2005 - 2010

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: