The time has come, all the hard work, research and time spent was worth it, your dream engine is now sitting inside your car's engine bay. Make sure you keep that engine properly protected when you first start it up with Driven Racing Oils BR 15w50 (00106) Engine Break-In Oil. All of the Driven BR oils are specially formulated with an additive package to promote ring seal and provide maximum protection available for cams and lifters during initial break-in. This petroleum oil provides the highest levels of zinc and phosphorus for flat-tappet engines and for tight clearance and/or low temperature break-in. The oil is compatible with methanol and high-octane race fuels. Becasue of this oils high viscosity it should be pre-heated to 180 degrees F before starting the engine for maximum protection. Due to it's 15w50 viscosity this BR engine oil can be used up to two hours on the dyno for engine break in before being changed to race oil.
This is for a case of 12 quarts of oil, you can also purchase individual quarts of BR 15w50.
Combine with the Engine Assembly Grease when building your engine for total engine protection during break-in.
We use one of the Driven Racing Oils Engine Break in Oils for all of our engine break-ins. The engine oil is available in the following viscosities.
- BR30 5w30, single quart
- BR30 5w30, 12 quart case
- BR40 10w40, single quart
- BR40 10w40, 12 quart case
- BR 15w50, single quart
- BR 15w50, 12 quart case
Contact us any time with special requests or questions, we are here to support your build and are always happy to share information and help save you $$$. Call or email 888-290-3213 or firstname.lastname@example.org(if you call be sure to leave a voice mail as we are often in the shop away from the phone)
Born from Joe Gibbs Racing, Driven Racing Oils utilize cutting-edge lubricant technology & on-track research for maximum performance and peace of mind that what you are putting in your engine will do the critical job of protecting those important components and eliminate friction