BC Stage 3 Camshaft BC0202

Product viewed: 6282
$382.00
Ex Tax: $382.00

Stage 3 Race Specifications

The BC0202 is built to full racing spec standards: featuring longer duration profile for added rpm. The camshaft is intended for use with a fully built engine and installation may require further tuning and ECU mods. The BC0202 must be used with the single spring, titanium retainer BC0200 kit.

  • BC0202 is designed for use with the Nissan S13 (SR20DET, Red Top)
  • Adv. Dur.: 272°/272°
  • Dur @ .050: 224°/224°
  • Lift (in): 494"/.494"
  • Lift (mm): 12.55/12.55
  • Rocker Ratio: 1.57:1
  • Not OEM compatible, must use BC0200 (Single spring, Titanium Retainer) Kit

The racing spec BC0202 camshafts fit the SR20DE and SR20DET engines which debuted in the Nissan S13 Silvia. An upgraded version of the engine with a larger turbo charger and variable timing cam (VTC) was later used in the S14 and S15, as a result these later SR20DET engines require the use of the BC0205 or BC0206 camshafts.

While VTC is preferred by some gear heads the system can be prone to rattling. One common fix for this is to buy the conversion kit to remove the VTC from the S14 and S15 SR20DET engines. Engines that have undergone this modification can then use the BC0202, or any other, intake camshaft for the S13.

For street/strip spec camshafts by Brain Crower, check out the BC0201.

Make Model Years
Nissan S13 1989 - 1993

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



×
×
×
×
×
×
×